Fire risk assessments · Kent, London & beyondSpeak to Darren J Young MIFSM
1st Aid Fire Limited

Fire door safety

Kingsway SOLO doorsets: check the new smoke-seal safety report

A new OPSS report concerns missing smoke seals on some Kingsway SOLO FD30S and FD60S Single Action Doorsets. Building managers should check the official identification and follow the manufacturer's response.

1st Aid Fire · Prepared with automated editorial assistance · Published 19 November 2026

Illustration of a closed fire door with an overhead closer in a corridor; not a photograph identifying a Kingsway SOLO doorset or a reported defect.
Illustration created for the 1st Aid Fire website.

The specific warning

OPSS's 18 November 2026 report identifies a high smoke-spread risk on some Kingsway SOLO FD30S and FD60S Single Action Doorsets missing necessary smoke seals. Only the smoke-control S suffix is affected. Smoke passing around a closed door can compromise an escape route.

Follow the manufacturer's programme

Kingsway's modification programme provides correct missing seals without charge. Pending inspection, its advice is to keep doors closed and check self-closers work. Responsible Persons should consider the issue in the site's FRA. If potentially affected but not contacted, use the official notice's contact details and reference KG-PSN-2026-01. This is a modification programme, not a blanket recall.

Make identification traceable

A practical first step is to locate the purchase, installation and maintenance records for the doors you manage. Record which building and door location each record concerns; a supplier name alone is not a complete product match. If the records are unclear, ask the supplier or manufacturer to confirm identification rather than treating a similar-looking door as proof. Keep their response with the relevant door record so that a handover to another manager does not lose the information.

Do not turn the notice into a DIY repair specification

This article does not specify a replacement seal, dimensions or a fitting method. Confirm the remedy through the manufacturer's programme and competent advice for the actual doorset. Avoid buying a generic strip and assuming the issue is resolved. Record who is arranging the inspection or work, what has been agreed and what completion evidence will be provided. An enquiry to a contractor is not the same as completed corrective action.

Keep routine checks and technical suitability distinct

Existing government guidance for England explains that simple routine fire-door checks and assessment of a door's suitability serve different purposes. It also cautions that an absent seal on an existing door does not automatically make every such door unfit. That general guidance should not be used to dismiss a product-specific warning. Raise uncertain findings with a competent person, and do not remove or disable doors or their closers on the strength of a short news summary.

For managers in Kent and South East London

The useful question for a property in Gillingham, Medway, elsewhere in Kent or South East London is whether the identified equipment is actually installed there. We are not reporting affected local sites or a new local rule. Contact 1st Aid Fire to discuss an agreed-scope fire-door survey or the relationship between door findings and your FRA; the manufacturer remains the source for its modification programme. Prepared with automated editorial assistance from official sources checked on 19 November 2026; no inspection or manufacturer approval by Darren is claimed.

Guidance and further reading

Sources checked 19 November 2026. This article offers general information; it does not determine the requirements or certify the condition of a particular property.

Discuss your next step

Contact Darren J Young MIFSM for an agreed-scope assessment, review or training enquiry.

Arrange a fire door survey or inspection Contact Darren

Back to all articles

FURTHER READING · DARREN J YOUNG MIFSM

Need to understand your fire doors?

Illustrated checks, clearer records and better decisions about repairs.

Explore Fire Doors & see inside →
Request an FRA quoteClient portal
1ST AID FIRE

AI service assistant

AI answers about our services; they can be wrong. For property-specific advice, contact Darren. Messages are sent to OpenAI when you ask a question. Do not include confidential or tenant information. Privacy details.

What can we help you with?

Send an enquiry to Darren

Your chat can be carried into the enquiry form. Nothing is emailed until you submit it.